Jet Stream 500
8
Versatile
An easy to access 5.25" x 5.25" x 16" test chamber allows various models to be quickly mounted
for testing. The test bed is easily removed from the tunnel for unrestricted access in mounting and
un-mounting models. The test section is made of a clear plastic so the model can be viewed while
under test. An angle of attack adjustment is available to adjust the a/- 30° with a resolution
of 5° so the model can be tilted without remounting airfoil models. This allows the lift and drag
forces to be measured at various angles and is very useful for demonstrating an airfoil's stall speed.
CO
2
car designs can also be optimized for speed by measuring the models cross sectional drag at
various wind velocities. With the drag force measured to 0.001 lbs., small design changes can be
studied.
Self Contained
The tunnel also performs an automatic self test every time the unit is powered up. If an error is
detected within the wind tunnel, the display informs the operator of the error condition and
disables operation. The test also detects calibration and functional problems before allowing the
tunnel to operate. The built-in force gages are
automatically
zeroed before each test to keep the
display results in calibration, therefore the unit should
never
require recalibration.
Safety
The Jet Stream 500 is designed with safety in mind. The Jet Stream 500 is capable of
automatically shutting down if it detects a problem.
Overall, the Jet Stream 500 is an invaluable tool when it comes to visually demonstrating
basic to advanced aerodynamic principles to students.