7
6
www.ijoy.com
Your iJoy
®
massage chair
requires some simple assembly.
Simply attach the backrest to the chair
base, plug it in, turn it on, and you’re
set to go!
Unpack the box
Chair base
GET
READY
2. Plug it in
Plug the power cord into a grounded 220-240 VAC power source.
Setting the
Child Safety Lock
to the Locked position prevents the power
switch from being turned on. Keep the child safety lock in the Locked
position when unattended, to prohibit children from using the chair.
4. Power on
Turn the master power switch to On
(located on the back of the chair).
3. Child safety lock
Make sure child safety lock is set to Unlocked.
ON
OFF
The iJoy
®
chair power panel offers a
convenience outlet
, which enables you to
plug in a low-wattage appliance such as a
lamp or laptop. Do not plug in appliances
that use wattages higher than 1 AMP,
such as a vacuum or a hair dryer.
1. Attach the backrest to the chair base
Before installing the backrest, remove the two screw knobs from the bottom of the backrest. Align the
guides on the lower sides of the backrest with the track on the chair base, then slide the backrest firmly
onto the chair base. From the bottom of the backrest, install and hand-tighten the two screw knobs.
Verify that the two screw knobs are installed and tightened before using the chair.
Backrest
CAUTION:
Be sure all cords and fingers are out of the way before installing the backrest, to
avoid damage or injury. You may want to use two people for installation, as the backrest is heavy.
Locked
Unlocked
