Important Assembly Instructions and Operation
Figure 1: Raise and lower the Backrest
by pulling the Backrest Lever by your
right arm.
6
7
Getting the most from your iJoy-100
Safety Precautions while
using your Massage Chair
•
Comfortable clothing is recommended while using your
massage chair.
•
Your massage chair was meant to be used in a relaxed
position. While sitting in the chair, never force any body
part into the backrest area while the rollers are moving.
•
Do not allow children to use the massage chair.
•
If you feel any abnormal discomfort during the operation of
your massage chair, turn off the power immediately and do
not use the chair. Consult your physician.
•
Do not sit on the controller.
•
Do not pull on the AC cord.
•
Always confirm that there are no obstacles behind the chair
and that there is sufficient space to recline.
•
When using your massage chair after it has been in
storage, check to see that the chair is operating properly
prior to sitting in the chair.
• Do not attempt to repair your massage chair yourself.
If a malfunction occurs, please contact
Interactive Health at (800) 742-5493.
Your iJoy-100 massage chair is a quality piece of
furniture, and can be utilized and cared for like
the rest of the furniture in your home.
The HTT robotic massage
®
system inside your chair is a
sophisticated electro-mechanical device that requires
some special care and safety precautions.
Please follow these basic guidelines carefully. They are
provided to ensure the maximum enjoyment of your chair.
Massage Softening Pad
This pad can be used to soften the intensity
of the massage.
To Install (see fig. 3, page 6):
1. On the front side of the backrest there is a zipper.
Unzip this and you will find a pocket.
2. Insert the softening pad into this pocket and close
the zipper.
You will find the massage to be less intense when the
softening pad is installed. You can adjust the intensity
by adding or removing the softening pad. Addtional
softening pads are available for an additional charge
from Interactive Health.
fig. 1
Figure 2: For a milder massage, if
desired, unzip the outer panel on the
Backrest and insert the Massage
Softening Pad into the open pocket.
Close the zipper on the Backrest.
fig. 2
Figure 3: Plug AC Cord into a grounded
wall outlet and turn Master Switch to ON.
fig. 3
