Your HTT-10XL-RPV is
basically ready to use
right out of the box.
Only a small amount of
assembly is required
and this can be easily
completed in just a few
minutes. Please follow
the steps described to
the right to assemble and
begin using your chair.
2. Pull the handle on your right side of
the chair while you are sitting in the
chair to raise the footrest.
Important Assembly Instructions and Footrest Operations
1. Turn The Master Power Switch ON
to activate the hand held controller.
ALWAYS LOWER THE FOOTREST BEFORE GETTING OUT
OF THE CHAIR.
DO NOT STAND OR SIT ON THE FOOTREST.
CAUTION: REMOVE YOUR LEGS FROM THE CALF
MASSAGER IF IT IS UNCOMFORTABLE.
DO NOT ROTATE THE FOOTREST FULLY AROUND. STOP
WHEN YOU HEAR THE CLICK. A FULL TURN WILL
BREAK THE FOOTREST.
8
9
Getting the most from your HTT-10XL-RPV
Safety Precautions while
using your Massage Chair
•
Comfortable clothing is recommended while using
your massage chair.
•
Your massage chair was meant to be used in a relaxed
position. While sitting in the chair, never force any body
part into the backrest area while the rollers are moving.
•
Do not allow children to use the massage chair.
•
If you feel any abnormal discomfort during the operation
of your massage chair, turn off the power immediately
and do not use the chair. Consult your physician.
•
Do not sit on the controller.
•
Do not pull on the AC cord.
•
Always confirm that there are no obstacles behind the
chair and that there is sufficient space to recline.
•
When using your massage chair after it has been in
storage, check to see that the chair is operating properly
prior to sitting in the chair.
• Do not attempt to repair your massage chair yourself.
If a malfunction occurs, please contact
Interactive Health at (800) 742-5493.
Your HTT-10XL-RPV massage chair is a quality piece of
furniture, and can be utilized and cared for like
the rest of the furniture in your home.
The HTT robotic massage
®
system inside your chair
is a sophisticated electro-mechanical device that
requires some special care and safety precautions.
Please follow these basic guidelines carefully.
They are provided to ensure the maximum
enjoyment of your chair.
Massage Softening Pad
This pad can be used to soften the intensity
of the massage.
To Install:
1. Remove the pad.
2. On the backside of the back cover pad at the top
there is a zipper. Unzip this and you will find a
pocket in the back cover.
3. Insert the softening pad into this pocket and close
the zipper.
4. Re-Install the back pad and use the chair
as normal.
You will find the massage to be less intense when the
softening pad is installed. You can adjust the intensity
by adding or removing the softening pads. Addtional
softening pads are available for an additional charge
from Interactive Health.
fig. 1
fig. 2
4. Pull the oval shaped footrest handle
shown in fig 4. on your right side of
the footrest to rotate the footrest.
DO NOT ROTATE THE FOOTREST
FULLY AROUND. STOP WHEN YOU
HEAR THE CLICK.
3. The footrest will rise to your
desired angle while you pull the
handle in fig 2.
fig. 3
fig. 4
7. For a foot massage: Pull the footrest
handle and rotate the footrest counter
clockwise towards you until the
footrest is moving freely.
fig. 7
fig. 8
6. For a calf massage: Insert your legs
into the calf massager (see page
10 - #16 & #17 for details on how
to activate the calf massage with the
hand held controller).
CAUTION: REMOVE YOUR LEGS
FROM THE CALF MASSAGER IF IT
IS UNCOMFORTABLE.
5. Rotate the footrest COUNTER
CLOCKWISE, which is towards you
until it clicks into position.
fig. 5
fig. 6
8. Insert your feet in the calf massager
while it is moving freely and not
locked in place (see page 10 #16
& #17 for details on how to activate
the calf massage with the hand
held controller).
9. Pull the footrest handle and rotate
the footrest CLOCKWISE, away from
you until you hear a click and then
use the back of your legs to lower the
footrest back to the upright position.
fig. 9
