D-0128226-A – 2020/12
Air Fx Caloric Irrigator – Instructions for Use - US
Page
19
Guidance and manufacturer’s declaration - electromagnetic emissions
The
Air Fx
is intended for use in the electromagnetic environment specified below. The customer or the
user of the
Air Fx
should assure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The
Air Fx
uses RF energy only for its internal
function.
Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class B
The
Air Fx
is suitable for use in all commercial,
industrial, business, and residential environments.
Harmonic emissions
IEC 61000-3-2
Complies
Class A Category
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies
Recommended separation distances between
portable and mobile RF communications equipment and the
Air Fx
.
The
Air Fx
is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the
Air Fx
can help prevent electromagnetic interferences by
maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the
Air Fx
as recommended below, according to the maximum output power of the
communications equipment.
Rated Maximum
output power of
transmitter
[W]
Separation distance according to frequency of transmitter
[m]
150 kHz to 80 MHz
d
= 1. 17
√𝑃𝑃
80 MHz to 800 MHz
d
= 1. 17
√𝑃𝑃
800 MHz to 2. 7 GHz
d
= 2. 23
√𝑃𝑃
0. 01
0. 12
0. 12
0. 23
0. 1
0. 37
0. 37
0. 74
1
1. 17
1. 17
2. 33
10
3. 70
3. 70
7. 37
100
11. 70
11. 70
23. 30
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d
in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where
P
is the maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
Note 1
At 80 MHz and 800 MHZ, the higher frequency range applies.
Note 2
These guidelines may not apply to all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
