6
FIND
IN
G YOUR W
A
Y
Axxess
®
Model 8620 Phone User Guide – Axxess IP Mode
Message Indicator Lamp
The message indicator lamp (located at the top, right-hand corner of the phone) shows
the same indications as the
button. This indicator flashes whenever there is a
waiting message.
Power Requirements
The Model 8620 Phone requires either an individual power supply unit or a central-
ized power source to power the phone. Check with your system administrator about
the specific power requirements for your phone.
Before connecting a power supply unit, make sure it is compatible with your phone.
The following individual power supply units are compatible with the Model 8620
Phone:
•
Inter-Tel Power Supply Unit (Part Number 806.1114)
•
Red Hawk Single Port PowerSense
™
(Part Number 901.0407)
•
An industry-standard IEEE 802.3 Power Supply Unit
It is recommended that you plug your phone’s individual power supply unit into an
Uninterruptible Power Supply (UPS). If your phone’s power supply unit is not
plugged into a UPS and the power fails, the current phone call will be dropped.
NOTE:
Contact your system administrator to order a new power supply unit for your
phone.
Your system may be configured to use a centralized power source (power over Ether-
net) rather than an individual power supply unit. Your system administrator will
explain how to connect your phone to the centralized power source. If your phone
uses power over Ethernet, do not connect an individual power supply unit to the
phone.
MSG
Summary of Contents for AXXESS 8620
