MADE IN KOREA
9007908610
VDC-273/413
Digital Color Camera
- Line Lock
To set the camera in LL mode for synchronization with the power supply frequency, take the following steps.
1. Turn switch
to “L”;
2. Turn switch
to “PHASE”;
3. Press the + or – button
and
to make the phase variable.
Adjust with the button
and
so that the vertical phase of the camera matches with the vertical
phase of another camera (or system) with a multi-channel oscilloscope.
For initial setting, press RESET button .
- White Balance
White Balance can be adjusted within the scope of 2900-8000K color temperature.
When switch
is at “AUTO” the white balance is adjusted automatically.
For manual adjustment, take the following steps.
1. Turn switch
to “MANUAL”;
2. Turn switch
to “W,B”;
3. Pressing “R” button
increases redness while pressing “B” increases blueness. For initial setting,
press RESET button .
- BLC (Back Light Compensation)
The switch 7 improves an image that is darkened because of backlighting. Set this switch to ON for
backlight subjects.
- AES
Turning this switch 8 “ON” when a lens with a manual iris diaphragm is used enables the automatic
adjustment of image brightness. In this case the shutter speed changes according to the brightness of
the subject.
AES functions only when AGC switch 9 is turned on.
- AGC
The switch 9 automatically increases the camera’s sensitivity when the level of amdient light drops.
ON: AGC is activated.
OFF: AGC is not activated.
Specifications
Specifications
Image Pickup Device
1/3 inch interline-transfer CCD
Number of Effective Pixels
VDC273
NTSC
510(H) 492(V)
PAL
500(H) 582(V)
VDC413
NTSC
768(H) 494(V)
PAL
752(H) 582(V)
Synchronization Method
INTERNAL / LINE LOCK
Scanning Frequency
NTSC
HORIZONTAL
15.734Hz
VERTICAL
59.94Hz
PAL
HORIZONTAL
15.625Hz
VERTICAL
50Hz
Video S/N Ratio
48dB (50% AGC OFF)
Minimum Required Illumination
0.9 Lux (F1.2 AGC-ON)
Lens Mount
C / CS
Power Supply
AC 24V 50/60Hz
Power Consumption
5W
Dimensions (mm)
70(W) x 56(H) x 134(D) mm
DIGITAL COLOR CAMERA
Home Page
: http://www.inter-m.com
* Specifications and design subject to change without notice for improvements.
