DIGITAL PA SYSTEM
16
PSI-5120A/5240A
•
Press the ENTER (Execute) button to select the copy mode, and setting method is same as CD COPY
function.
•
Press the ENTER (Execute) button to start Copy. If copying is completed, the function is automatically
changed to the Standby mode.
•
Changing Function to the DRP mode enables to find contents of copying.
•
Pressing the
■ (
STOP) button during copying stops copying. Only tracks whose recording is
completed are saved in the relevant memory.
- To copy contents of inner memory (DRP) to USB memory
•
Press the FUNCTION button to change to DRP mode.
•
Pressing the COPY button changes the mode to copy standby mode, and position of the memory to
be saved is displayed in the display.
•
Press the ENTER (Execute) button to select the copy mode, and setting method is same as CD COPY
function.
•
Press the ENTER (Execute) button to start Copy. If copying is completed, the function is automatically
changed to the Standby mode.
•
Changing Function to the USB mode enables to find contents of copying.
•
Pressing the
■ (
STOP) button during copying stops copying. Only tracks whose recording is
completed are saved in the relevant memory.
※
Caution : 1) Since signal is output during CD COPY operation, minimize the volume if you want
only COPY. (No output is going out if copying between USB and DRP)
2) If memory space is insufficient during COPY operation, “MEMORY FULL” flickers on the
display. In this case, delete the unnecessary part by using DELETE function.
3) If you copy WMA format files, you have to consider the remaining space of the memory
because WMA file requires about 2 times of the file size.
4) No Folder Copy is supported.
8) RECORDING
This is function used to record broadcasting or lecture contents.
- Place the Memory Select switch at position to save. (USB or DRP)
- Press the Record (REC) button to Record Standby status.
Memory
Select Switch
REC/FAUSE
Button
