Inter-m NC-900, Operation Manual

Page: 10 / 20

NETWORK CONVERTER
8
NC-900
Operation
Operation
①
Standby screen of the device. The model name and primary/secondary network information are displayed.
②
In the standby screen, turn the Display Control Switch on front panel to the right to display the Network
Primary details (IP Address, Subnet Mask, DNS Server, and Mac Address). In the Network Primary details
screen, turn the Display Control Switch on the front panel to the left, the standby screen (model name,
primary/secondary network information) is displayed.
③
In the Network Primary details screen, turn the Display Control Switch to the right to display the Network
Primary status (RX/TX data rate). In the Network Primary status screen, turn the Display Control Switch to the
left to display the Network Primary details (IP Address, Subnet Mask, DNS Server, and Mac Address).
④
In the Network Primary status screen, turn the Display Control Switch to the right to display the Network
Secondary details (IP Address, Subnet Mask, DNS Server, and Mac Address). In the Network Secondary
details screen, turn the Display Control Switch to the left to display the Network Primary status (RX/tX data
rate).
⑤
In the Network Secondary details screen, turn the Display Control Switch to the right to display the Network
Secondary status (RX/tX data rate). In the Network Secondary status screen, turn the Display Control Switch
to the left to display the Network Secondary details (IP Address, Subnet Mask, DNS Server, and Mac
Address).
Pri. 192.168.1.99
Sec. 0.0.0.0
NC-900 0.1.0.0
INS 192.168.32.190
MAC 00:1d:1d:02:a5:0e
Mask 255.255.254.0
IP 192.168.47.45
Network Pri.
TX KB/s
0.00
0.00
RX KB/s
Network Pri.
INS 192.168.32.190
MAC 00:1d:1d:02:a5:0f
Mask 0.0.0.0
IP 0.0.0.0
Network Sec.
TX KB/s
0.00
0.00
RX KB/s
Network Sec.
①
②
③
④ ⑤