manualshive.com logo in svg

Inter-m MX-1646D, Operation Manual

Share
Download
Inter-m MX-1646D Operation Manual Download Page 18

PROFESSIONAL AUDIO MIXER

16

MX-1646D

4. How to Use USB Memory and SD Card 

 
 
 
 
①

You can use your USB memory or SD card to play / record. 

②

In case both USB memory and SD card are mounted, press the SD/USB selection switch to select which 
one you want to use for playing / recording. 

③

Carefully check the direction when inserting the USB memory or SD card. 

④

When inserting the SD card, push it in until it clicks. 

⑤

For more detailed information about supported USB/SD memory specifications, refer to the following 
[Table 3: USB/SD Memory Support Specifications]. 

⑥

When you insert a USB memory or SD card, files and folders are automatically sorted. Files and folders 
are sorted in the following method. For detailed information, refer to the following  
[Image 1: File / Folder Sorting Method]. 

⑦

When the memory is connected normally and the sorting sequence is completed, the LED of the STOP 
button lights up and it is in the PLAY mode. 

※

Caution: If a lot of files are stored in the USB/SD memory, it may take some time until the LED of the 
STOP button lights up and the PLAY mode is operated. 

⑧

Folder 1 is the root folder. If you add folder(s), folders are sorted starting from 2. 

⑨

If a folder does not have supported audio file, the corresponding folder is not displayed. 

 

    

           [Table 3: USB/SD Memory Support Specifications]

SD CARD

SD CARD

Type

Specifications

USB Interface

USB 1.1 supported, USB Hub not supported

SD Card Interface

SD, SDHC supported

Memory Format

FAT16, FAT32

Maximum Memory Capacity

32GB (FAT), multi-partition not supported

Maximum Sound Source File Size

2 GB

Maximum File / Folder Name

128 bytes

Folder Structure (Tree Structure)

Up to 16 layer (Tree Structure); up to 260 characters for path 
name including file name

WAV Playback

Extension

wav

Sample Rate

8k, 16k, 32k, 11.025k, 22.05k, 44.1k, 12k, 24k, 48kHz

Format

16 bit PCM

MP3 Playback

Extension

mp3

Sample Rate

8k, 16k, 32k, 11.025k, 22.05k, 44.1k, 12k, 24k, 48kHz

Bit Rate

8 ~ 320kbps

WAV Recording

Extension

wav

Sample Rate

44.1kHz

Format

16 bit PCM

Summary of Contents for MX-1646D

































Reviews:

No comments

Brands by name

Popular brands

Load more brands