Inter-m DPA-5075M i, Operation Manual, Page: 15 / 23

DIGITAL MULTI AMPLIFIER
13
DPA-5075M
Communication Between DPA-5075M, And DPA-5075M and PC
Communication Between DPA-5075M, And DPA-5075M and PC
DPA-5075M can link communicate up to 200 devices by using RS-422 DIRECT CABLE.
1) Setup the device ID
ID can be setup by using 8-pin address setting located on the rear panel as follows.
ID can setup up to ( 1 (MASTER) ~ 200 ). ID is decided as exponential of 2.
Ex)In case of setting by MASTER device Ex) In case of setting by No. 15 device
2) Amplifier status check function (RS-232).
DPA-5075M can monitor the operation and error status of devices by using RS-232 serial communication.
2-1) Connecting PC to DPA-5075M
Connect between RS-232 terminal on the rear panel of DPA-5075M and RS-232 terminal of PC
2-2) Connecting between DPA-5075M
EX) Multiply-connected method
4
HOT
COLD
3 2 1
4 3 2 1
133.3 Ω 133.3 Ω 133.3 Ω 133.3 Ω
(100V) (100V) (100V) (100V)
4
HOT
COLD
3 2 1
4 3 2 1
133.3 Ω 133.3 Ω 133.3 Ω 133.3 Ω
(100V) (100V) (100V) (100V)
4
HOT
COLD
3 2 1
4 3 2 1
133.3 Ω 133.3 Ω 133.3 Ω 133.3 Ω
(100V) (100V) (100V) (100V)
4
HOT
COLD
3 2 1
4 3 2 1
133.3 Ω 133.3 Ω 133.3 Ω 133.3 Ω
(100V) (100V) (100V) (100V)
LINK IN
LINK IN LINK OUT
LINK IN LINK OUT