DIGITAL POWER AMPLIFIER
3
DPA-300S/600S/900S/1200S, DPA-300SO/600SO/900SO/1200SO
Features
Features
- High Power PA Amplifier
70V/100V Power amplifiers produce 300/600/900/1200W rated power.
- Emergency Power Back Up (DC24V) capability
The unit operates on a DC24 V battery power supply for emergency back up without UPS (DPA-SO models are
not included with Emergency Power Back Up (DC24V))
- Rated Output Power Via DC Backup Supply
Output power can be maintained as AC power when 24V DC power supplied.
- Advanced Power Circuitry Design
The combination Class D type amplification circuitry combined with SMPS creates a high efficiency amplifier
offering reduced power consumption and low heat dissipation and weight.
- High Quality Sound Design
The total harmonic distortion is reduced to less than 0.03% THD, with a high signal to noise S /N ratio of over
103dB
- Advanced Protection Circuitry
Advanced protection circuitry guards against overheating, shorted outputs, DC output, overloads and
mismatched power
- A Variety of operation Indicators
Signal, -10dB signal level, Clip, Protection and system power (AC, DC, STBY) indicators
- Balanced Input
This connection is used to ensure the lowest noise operation which eliminates the common noise from the cable.
- Remote Power ON/OFF
The remote power allows the amplifier to be turned on or off from a distance or other device via dry contact
closure.
- PRIORITY Input
PGM is interrupted and over ridden by the Priority input, when a contact closure is received on the PRI select
terminal. This is Ideal for Emergency message broadcasting applications.
Accessories
Ac Power Cord x1
3P Terminal Block x1
2P Terminal Block x1
2P Terminal Block (Ac Remote power) x1
8P Terminal Block x1
Operation Manual x1
Screws for Rack mount Bracket x4
