16
CD-3500
MULTIPLE COMPACT DISC PLAYER
Troubleshooting Guide
Troubleshooting Guide
If your unit should not perform as expected, consult the table below to see if the problem can be corrected
before seeking help from your dealer or our service organization.
PROBLEM
POSSIBLE CAUSE
REMEDY
No power
- The AC input cord is disconnected.
- Connect the cord securely.
- The POWER button is not pressed
- Press the POWER button to ON.
correctly.
No play
- The disc is loaded upside down.
- Reload the disc with the printed
side up.
- Dirty disc.
- Clean the disc.
- Defective or deeply scratched disc.
- Load another disc.
No sound
- Incorrect connections.
- Make connections correctly.
- Incorrect operation of the amplifier.
- Operation the amplifier correctly.
- The “II” indicator lights up.
- Press the PLAY or PAUSE button
to cancel the pause mode.
Poor or distorted sound
- The unit is connected to the
- Make connections correctly.
PHONO input jacks of the
amplifier.
- Check the connections and connect
- Poor connections.
all cords securely.
Sound skips
- Defective or deeply scratched disc.
- Play another disc.
- This unit is placed on a surface that
- Place this unit on a stable surface.
is subject to vibration or physical
shock.
Programming or
- The disc is dirty or badly scratched.
- Try again with a scratch-free disc.
deleting does not
- The programming or deleting
- Try again.
perform.
procedure is not correct.
- The number of the programmed or
- Check the number of the
deleted selections is 32.
programmed or deleted selections.
