Inter-lux SATTLER Assembly Instruction Manual Download Page 12

12

S

5000 mm

b

a

3000 mm

Leuchte

Assembly instruction

pendant canopy

canopy

ceiling attachment

supply line

terminal block

lid

cable gripper

cable length  

a

cable gripper

cable length  

b

pre-assembled

cables

outer sleeve

Power

Supply cable

Luminaire with pendant canopy –

Connecting the light fixture

with separate supply line

Mounting the Canopy Ceiling Attachment

Verify sufficient load-bearing capacity of the ceiling!

1. Fasten the canopy ceiling attachment to the ceiling at the 2

mounting points. Ø 6mm / 1/4‘‘ drill and wall plugs

2. Connect the power supply and the control signal to the terminal

block of the canopy. For this, dismount the terminal block, connect

the cables and mount the terminal block again. Insert the two

pre-assembled steel cables (5000mm) and the power supply cable

through the canopy lid, fasten cable anchorage and lid with

magnets.

Mounting the Pendant Canopy

3. Move the outer sleeve of the pendant canopy up, turn and then

move it down.

4. Insert both steel cables (cable length a) in the cable gripper of the

pendant canopy and adjust to desired length by applying slight

pressure to the cable gripper.

Never adjust the suspension under load to avoid 

damage to the steel cables.

5. Lock the cable grippers on the canopy by use of the insulated

knurled nut.

6. Protruding steel cables may be shortened, if necessary.

Shortened cables may only be replaced by the
manufacturer.

7. Connect the supply line to the terminal block of the pendant

canopy, lock cable anchorage. Move the outer sleeve back up.

Connecting the Luminaire

8.

Fasten the luminaire body to the bottom part of the pendant

 

canopy at the cable anchors provided with the pre-assembled

 

cables (cable length b) and adjust by applying slight pressure

 

to the cable hold.

9.

Lock the cable holds by use of the insulated knurled nut.

10.

Connect the pre-assembled supply line to the terminal block at

 

the bottom of the pendant canopy. Lock cable anchorage.

11.

Put the sleeve of the pendant canopy back in position and

 

fasten it.

12.

Check the luminaire functions.

1

1

/

08

/2018

INTER-LUX 

Phone: (410)381-1497 

Web: www.inter-lux.com

Summary of Contents for SATTLER






































Reviews: