25
Intenza Treadmills Handbook. Maintenance. How To Tension The Belt
When walking on the running platform, if a slipping sensation is experienced the belt has
stretched and is slipping across the rollers.
The running belt will stretch over time. This is a normal and common adjustment to make on any treadmill. To eliminate any slipping
please follow the instructions below—
How To Tension The Running Belt
1
Tension both bolts on the rear roller 1/4 turn clockwise.
2
Try the treadmill at 1.0 km/h (0.5 mph) speed to check for slipping.
3
Try the treadmill again to check for slipping.
IF IT IS A
MINOR
ADJUSTMENT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Place 4 pieces of tape, 1,000mm apart, on both edges of the running belt.
2
Tighten the tensioning bolts until the distance between the tapes are increased to 1,005mm (39.75 inches).
3
Try the treadmill again to check for slipping.
IF IT IS A
SIGNIFICANT
ADJUSTMENT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1,000mm
1,000mm
1,005mm
1,005mm
EN
PLEASE NOTE
Make adjustments in 1/4 turn.
Do not
exceed one full turn of the Adjusting Screws. Over
tightening the belt can significantly shorten the belt life.
