Intenso S10000-C, User Manual

Page: 14 / 94

EN
- Page 4 of 7
SAFETY INSTRUCTIONS
Children often underestimate dangers or do not recognise them at all. This device is not intended
to be used by persons (including children) with restricted sensory, physical or mental abilities
or lack of experience and/or knowledge, unless they are supervised by a person responsible for
their safety or received instructions from the person on how to use the device and they have
understood the resultant dangers. Unsupervised children should not have access to the device.
Make sure that children do not play with the device.
Dangers for children and persons with restricted physical, sensory or
mental abilities:
b) Charging devices with the Powerbank
This Powerbank has an USB A port (OUT) (Output 2.1A) and an integrated USB cable with
Type C plug (OUT) (Output 2.1A).
There are two options of charging a device via the Powerbank:
Option 1: Connect the Type C port (OUT) of the integrated cable with the Type C port of
the device to be charged. The charging procedure starts automatically.
Option 2: Connect the supplied USB cable with the USB A port (OUT) at the Powerbank
and the other end of the USB cable with the microUSB port of the device to be charged.
You can charge two devices simultaneously with the Powerbank, for example, a Tablet at the
USB A (OUT) port and a Smartphone via the integrated cable with Type C plug (OUT).
Of course you can also use your own USB charging cable to connect the Powerbank with
your device. However, please note that devices can only be charged via the USB A port
(OUT) of the Powerbank.
If a device is charged with the Powerbank and the capacity of the Powerbank is almost
exhausted, this is signalled by blinking of the last status LED. Please re-charge the
Powerbank.
Please note that while charging a device with a Powerbank, about 30% of the total capacity
is used up just through the charging process. This is due, for example, through the loss of
power from circuit warmth and voltage conversion.
The Powerbank has to be used regularly for optimum performance. If this is not the case,
charge the Powerbank fully at least every three months.
Make sure that the warmth created through the charging process can be emitted from the
device (ideally place the Powerbank on a firm and heat-resistant base while in use).
Do not use the device in extremely cold, hot, humid or dusty areas. Do not subject it to direct
sunlight. Protect the product from open fire. There is danger of explosion!
Protect the device in every operating state against impact and falling.
This device is sensitive to electrostatic discharge. Therefore protect the device against every
possible electrostatic discharge.
To avoid malfunctions, do not connect the USB output ports of the device with USB ports of
computers or other devices. They are only intended for charging devices.
General