Intenso POWERBANK S5000, Manual

Page: 14 / 65

Page 5 of 8 EN
Operation
1. Status display LED
The actual charging status of the Powerbank will be showed to you by the
LED status when you charge and/or discharge the Powerbank.
LED light
% - Energy
LED 1 LED 2 LED 3 LED 4
1 % - 25 %
● ○ ○ ○
26 % - 50 %
● ● ○ ○
51 % - 75 %
● ● ● ○
76 % - 100%
● ● ● ●
2. Starting-Up / Powerbank Charge / Charging
Connected Devices
a) Charging the Powerbank
Please connect the included Micro USB cable to the micro USB port of the
Powerbank, and connect the other end of the USB cable to a standard USB
port of a computer or USB power adapter. The charging process and current
charging status is indicated by the LED status lights. If the Powerbank is fully
charged, the LED status lights remain illuminated. The required charging
time of the Powerbank depends on the selected charging source and the
output power (5V / 2A max.).
b) Charging devices through the Powerbank

This Powerbank has a USB entry (output 2A max.) and an integrated USB
cable with micro-USB plug (output 2A max.).

There are two possibilities to charge a device through Powerbank:
Possibility 1: Connect the micro-USB connection of the integrated cable
with the micro-USB entry of the device to be charged. The charging
process will start automatically.
Possibility 2: Connect the supplied USB-cable with the USB A entry of
Powerbank and the other ending of the USB cable with the micro-USB
entry of the device to be charged.