Intenso Memory 2 Move Pro, Short Manual

Page: 34 / 216

EN - 7
8. USING PC OR MAC
8.1 LIAISE A WIRELESS LAN CONNECTION WITH THE PC
Switch-on “Memory 2 Move” by pressing the power button at the front panel.
Wait for few minutes until the Wireless LED stops flashing. Enable the Wi-Fi feature on
your PC and open the Wireless Network Connection. Select the “Memory 2 Move”
wireless connection (default wireless SSID: Memory2Move-XXXX and password:
intenso1 ).
Note: For your own safety, please change your password after successful connection.
Once you have successfully connected to “Memory 2 Move”, you may now run the
“WiFi Finder” to search for your device and complete the configuration process.
Our included “WiFi Finder” is the only software that you will need to install on your
computer. This software utility allows you to easily search and look for your “Memory
2 Move” that is connected from your home network. The software must not be
installed.
Simply click on the WiFi Finder Icon which is part of CD content.