Intense UZZI, User Manual

Page: 9 / 20

I N T E N S E C Y C L E S / / 9
C ONNE C T ING TOP L INK TO F R ON T T R I A NGL E //
A
Hold top link (#130220) with shock
mount oriented forward; hold spacer
(#130789) against inside of upper
bearing race.
B
Match upper linkage to pivot point on
top tube, making sure spacers do not fall
out (IMAGE #1).
C
Using upper pivot axle (#130780)
insert through non-drive side of top link
bearing and push through to drive side
bearing making sure spacers do not fall
out. Insert shoulder bolt through drive
side, engage threads.
D
Holding a 5mm HEX wrench on non-
drive side upper pivot axle (IMAGE #2),
insert torque wrench into bolt on drive
side and tighten to 20 Nm / 175 in-lbs
(IMAGE #3).
C ONNE C T ING B OX L INK TO F R ON T T R I A NGL E //
A
Hold bearing cap (#130778) with rounded
edges facing outward against bearings on
box link (#130770) (IMAGE #4).
B
Match link to front triangle pivot
point and insert pivot bolt with greased
threads (#130791) through non-drive
side of frame and box link with spacers
(IMAGE #5). Use 8mm HEX wrench and
tighten to 7 Nm / 60 In-lbs (IMAGE #6).
1 4
2 5
3 6