4
5
English
Svenska
Suomi
Norsk
X5671 VDSL2/ADSL2+
Wireless modem
Start Box
Check that the following items
are in the Start Box:
• Inteno X5671 Wireless Modem
• Power adapter
• LAN Network cable (yellow)
(large contact)
• Telephone cable (small contact)
• Telephone extension adapter with
built in DSL filter
• Bracket (for upright mounting)
Connecting the DSL
Do as follows:
1. Shut down your computer.
2. Connect the telephone extension
adapter to the first telephone jack
inside the house.
3. Connect the telephone cable between
the telephone extension adapter
marked ADSL and the X5671
DSL-port (DSL).
Connecting the LAN
1. Connect the yellow network cable
between the X5671 network port
(LAN 1-4) and the network port on the
back or side of your computer.
NOTE! In some cases, your broadband
supplier will instruct you to connect to
a specific network port (LAN 1-4).
Verify this in the documents and/or
manual you received from your
service provider.
2. Finally, plug the power adapter into
an electrical outlet and the contact
into the modern where it is labelled
“Power.”
3. Start the computer.
4. The colored lights will blink for roughly
30 seconds. If you have connected
your modem properly, the Power, DSL
and Internet lights will be a fixed green
color. See picture labelled “Front”. You
have now connected the X5671.
Back
Front
X5671 VDSL2/ADSL2+
Wireless modem
X5671 VDSL2/ADSL2+
Wireless modem
This installation guide will help you install the Inteno X5671,
ADSL2+ Modem. Your service provider will supply you with
information about log in and access.
a
b
d
c
XG6525
AR382
AR382
