11
3.2 Main operation description
3.2.1 Single pixel correction setup
Press
C
button to do single pixel correction.
Note:
•
Camera will do single pixel correction automatically for several time when power on.
•
After start-up, since the camera is in thermal equilibrium processing, it may need single pixel
correction for several times. After about 45 minutes, the system reaches thermal equilibrium.
If so, the system usually has no need to do single pixel correction.
•
The camera running built-in calibration mechanism can do calibration anytime. Besides, it is
normal when you hear some “click” noise during calibration.
3.2.2
Auto imaging mode setup
Setup
: Press
MENU
button until
Auto: X
is activated, press
UP
button or
DOWN
button to
select needed mode.
Exit:
Press
MENU
button continuously until menu disappeared.
Note:
There are three modes:
•
Auto 0
: Manual gain, manual brightness. The camera will not adjust brightness and gain
automatically according to the observed object.
•
Auto 1
: Manual gain, auto brightness. The camera adjusts brightness automatically according
to the observed object and you may adjust gain manually.
•
Auto 2
: Auto gain, auto brightness. The camera can adjust both brightness and gain
automatically according to the observed object.