7
3
．
Thermal imaging system output interface
Figure 4 thermal imaging system output
a)
Display
：
CVBS
b)
Power
：
DC12V
Installation and wiring
1
．
Hold the ears of the thermal imaging system interface of the connecting cable,
insert the cable connecter to the 26 pin port. Make sure the connecting
dimension is correct. Shown as below
Figure 5 cable connecting
2
、
Use the supplied bolts to connect the installing frame and the thermal imaging
system, while the frame is already fixed on the system on delivery. The size is as
below
Imaging system connector
26 pin port
