5
Quick Start
Step1. Please connecting the power adapter to the camera, then Pan-Tilt will self-checking, the lens will
lens introspection on the basis of push and pull. When lens and Pan-Tilt self-checking not normal, please
confirm whether the power supply to pull plug normal power. If still invalid, please see the specification
of the fault phenomenon and processing or phone seeking for technical support.
Step2. USB hub connected to the PC. The first time, the PC will automatically install the driver according
to the equipment.
Step3. Use the USB connect the camera with the USB hub. Connection for the first time, PC will
automatically install the driver according to the equipment, Use of relevant software (such as AMCAP)
to view the camera image. If you cannot view images, please pull plug USB, confirm USB is properly
connected, whether the driver installed correctly. If invalid, please see the specification of the fault
phenomenon and processing or phone seeking for technical support.
Step4. Using the USB cable connected the full duplex speakerphones to the USB hub. The first time, PC
will automatically install the driver according to the equipment. After connection, full-duplex speaker