14
4)
Apply / Cancel
Modify password and click the "apply" button to the
login page, press "cancel" button to cancel password
change.
6.4
Network Setting, please click
"
Network
"
1)
Land Settings
Default the IP address is 192.168.100.99, The MAC
address can be modified.
2)
Port Settings
A.
HTTP Port
IP address identifies the network device, the device
can run multiple web applications, each network
program using network port to transmit data, so data
transmission to be carried out between the port and
port. Port setting is to set up WEB SERVER program
using which port to transmit. When port mapping,
need to be consistent with the port number (default
port: 80)
B.
RTSP Port
Network camera support RTSP protocol, use the VLC
tools broadcast.
C.
PTZ Port
Support PTZ protocol, default port: 5678.
3)
Control Protocol Setting
Setting camera control communication protocol,
include Visca address, Pelco-D address, Pelco-P
address.
4)
RTMP Setting
Setting the camera stream, can set up two stream, in
the two stream selection control code stream of "On",
"Off", "Video", "Audio", etc.
5)
RTSP Setting
Setting network camera rtsp protocol of "On", "Off".
6)
ONVIF Setting
Setting the ONVIF protocol and ONVIF authorization
"On", "Off".
7)
Multicast Setting
Setting multicast "On", "Off", and multicast address
(default address 224.1.2.3) and port (default 6688)
8)
Apply / Cancel
Modify network parameters then press "Apply"
button to modify network parameters, press "Cancel"
button to cancel network parameters.
7
Device Information, please click “information”
Show the current device information, as shown below.
