background image

                                                                               

 

                                                       

       

 

1

 

             

                IT-PMC-1200 
           

2-ports 10/100M Media Converter

 

(SM & MM) 

 

 

 

 

 

 

Introduction: 

The  Media  Converter  complies  with  IEEE802.3,  IEEE802.3u, 

IEEE802.3x Standards. It is designed to convert data signal between 

10/100  Base-TX  and  100Base-FX  fast  Ethernet.  It  supports 

10/100Base-TX  and  100Base-FX  applications.  The  data  signal 

converted  by  such  high  performance  media  converter  can  be 

transmitted  up  to  120Km  maximum  by  fiber-optical  cable.  The 

Converter  is  equipped  one  optic  port  and  two  RJ45  Jacks  and  one 

external power supply  receptacle. Four  LED  indicators are built -in 

for  easy  diagnosing  and  monitoring  the  status  of.  It  can  be 

configured automatically for Full Duplex or Half Duplex operation.  

 

Packing List: 

IT-PMC-1200 is shipped with following items. 

1. IT-PMC-1200

×

2. 5VDC power adapter 

×

1(Media converter/5VDC) 

3. User manual 

×

Summary of Contents for IT-PMC-1200











Reviews: