7
29
SDI input (BNC interface)
( Optional)
30
TDR cable test interface
(Optional)
31
HDMI output interface
32
Micro SD card moveable,(comes with 8GB, supports up to 32GB)
33
UTP cable port: UTP cable tester port/ Cable tracer port
34
PSE power sourcing equipment. Tests PoE voltage
35
PoE power supply output or LAN test port (Use to test PoE or non-PoE IP camera)
36
Audio output and earphone interface
37
Audio input
38
USB 5V 2A power output (used only for power, not data)
39
DC12V2A charging interface
40
DC12V2A power output , for provisional DC power supply
3. Operation
3.1 Installing the Battery
The tester has built-in lithium ion polymer rechargeable battery. The battery cable inside battery
cabin should be disconnected for safety during transportation!
Prior to the use of the instrument, the battery cables inside the battery cabin should be well
connected.
Usually it does not need to disconnect the cable at the normal use
Pressing the key continuously can power on or off the tester.
Notice: Pls use the original adaptor and connected cable of the device!
When the battery icon is full or the charge indicator turns off automatically, indicate the battery
charging is completed.
Notice: When the Charge Indicator
turns off, the battery is approximately 90% charged.
