IntelliSense, Sierra and SpreadNet are registered trademarks of Honeywell, Inc.
All other trademarks are the property of their respective owners.
Copyright 2001 IntelliSense.
All rights reserved.
SPECIFICATIONS
Dimensions:
9.5 cm x 7.0 cm x 2.0 cm
(3. 74" L x 2. 76" W x 0. 79" D)
Weight:
87.9 g (3.1 oz.)
Operating frequency:
902 - 928 MHz Spread Spectrum
Input power:
two 3.6 VDC 1/2 AA lithium batteries
Output power:
100 mW maximum
transmitting period - 7.6 mSec
Replace batteries only with
IntelliSense Model # SN31L-BAT
SAFT LS14250BA
Operating environment:
0° to 60° C (32° to 140° F);
up to 95% relative humidity
(non-condensing)
RF emission standards:
USA:
FCC Part 15
CANADA:
IC
DESCRIPCIONES DETALLADAS
Tamaño:
9.5 cm x 7.0 cm x 2.0 cm
Peso:
87.9 g
Frecuencia de operación:
902 - 928 MHz Spread Spectrum
Entrada de corriente:
dos 3.6 VDC batería
Rendimiento de poder:
100 mW máximo
tiempo de transmisión- 7.6 mSec
Se reponen las baterías unicamente de
IntelliSense número de modelo SN31L-BAT
SAFT LS14250BA
Ambiente de operación:
0° to 60° C;
hasta 95% humedad relativa
(no condensar)
RF normas de emisiónes:
USA:
FCC Part 15
CANADA:
IC
IMPORTANT NOTES
Batteries should be replaced following a low battery indication or
every 3 years, whichever occurs first.
For continued reliability, the SN990-Keypad and SN991-Remote
should be tested at least once per month.
NOTAS IMPORTANTES
Baterías se deben reponer después que se vea la indicación de
batería baja o cada 3 años, según el cual que suceda primero.
Para asegurarse que el SN990-Keypad y el SN991-Remote
funcionen bien, estos deben de ser probado por lo menos una
vez al mes.
US Patents 4,977,577; 5,067,136; 4,581,606 PCT/US95/
02690; 5,457,713 PCT/US95/04731; 5,265,120; 08/560,304;
5,408,217; and 5,119,396
P/N 5-051-556-00 Rev C
FCC NOTICE
The Models SN990-Keypad and SN991-Remote generate and use radio
frequency energy. If not installed and used in accordance with the
manufacturer's instructions, they may cause interference to radio and
television reception. The Keypad and Remote transmitters have been
tested and found to comply with the specifications in Part 15 of FCC Rules
for Class B Computing Devices and FCC Part 15 Subpart C, Specifications
for Intentional Spread Spectrum Radiators.
If this equipment causes interference to radio or television reception - which
can be determined by turning the equipment on and off - the installer is
encouraged to correct the interference by one or more of the following
measures: 1) Reorient the antenna of the radio/television. 2) Connect the
AC transformer to a different outlet so the control panel and radio/television
are on different branch circuits. 3) Relocate the control panel with respect
to the radio/television.
If necessary, the installer should consult an experienced radio/television
technician for additional suggestions.
CAUTION:
IntelliSense does not support field changes or modifications to
any of the SpreadNet RF equipment unless they are specifically covered
in this manual. All adjustments must be made at the factory under the
specific guidelines set forth in our manufacturing processes. Any modifi-
cation to the equipment could void the user's authority to operate the
equipment and render the equipment in violation of FCC Part 15, Subpart
C, 15.247.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Industry Canada
This device complies with RSS-210 of Industry Canada. Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
