IntelliSense AWARE Installation Manual Download Page 13 | Manualshive

Page: 13 / 24

IntelliSense AWARE Installation Manual Download Page 13

Intellisense Systems Inc.

Page 12

Installation Guide – AWARE Flood System

INSTALLATION INSTRUCTIONS – AWARE FLOOD ASSESSORIES

This section details how to install multiple accessories with the AWARE Flood Node. It describes the
installation process for two accessories (the Water Level Pressure Module and the Water-Resistant Camera
Sensor) with more accessories coming at a later date. Ensure that the AWARE Flood Node is properly
mounted before installing any accessories.

This section is broken down into the following order:

1.

Water-Resistant Camera Sensor Installation

2.

Water Level Pressure (WLP) Module Installation – Part 1

3.

Powering On / Initialization Sequence

4.

Water Level Pressure (WLP) Module Installation – Part 2

Water-Resistant Camera Sensor Installation

Now install the water-resistant camera sensor. Complete the following steps below BEFORE powering on
the AWARE Flood Node:

1.

Screw the threaded connector into the AWARE Flood Node at port 3.

2.

Using zip ties and the two holes on the camera sensor, secure the camera sensor to the pole/fence
post.

«
...
11
12
13
14
15
...
»

Summary of Contents for AWARE

























Reviews:

No comments