IntelliSAW IRM-48 Reader
Installation Manual
Page 11 of 28
IRM-48 Reader
910.00371.0001
3
I
NSTALLATION
IMPORTANT
•
The installation instructions are only for the
IRM-48
Reader.
•
It is assumed an Air Interface Antenna, and Sensors have been installed and configured.
WARNING
INSTALLATION AND CONFIGURATION SHOULD BE PERFORMED ONLY BY
PERSONNEL WHO ARE TECHNICALLY COMPETENT AND AUTHORIZED TO DO SO.
LOCAL REGULATIONS REGARDING ELECTRICAL INSTALLATION AND SAFETY MUST
BE OBSERVED.
Failure to follow the instructions given can result in death or serious injury
WARNING
THE USE OF THIS EQUIPMENT IN A MANNER NOT SPECIFIED IN THIS MANUAL OR BY
THE MANUFACTURER MAY IMPAIR PROTECTION OF THE USER AND EQUIPMENT.
Failure to follow the instructions given can result in death or serious injury
CAUTION
THIS EQUIPMENT IS DESIGNED FOR INSTALLATION IN AN ENCLOSURE THAT
PROVIDES ADEQUATE PROTECTION AGAINST ELECTRIC SHOCK.
Failure to follow these instructions can result in personal injury.
3.1
U
NPACKING
1. Remove the product from its packing. Retain the packing for future use, to transport the
instrument to a different site or to return it to the supplier for repair/testing.
2. Examine the delivered items for damage or defects. If any are found, contact the courier
immediately.
3. In the Box:
a. Reader with a pre-installed din rail mounting clip
b. Power and Modbus RTU terminal block (6 position 5.08mm Plug)
