IntelLink INTIPCK825TH User Manual Download Page 23

Page: 23 / 327

Preface

Network Video Recorder

User Manual

Issue: V4.6 (2021-05-12)

1.2.6

Alarm Function

Real-time response to external alarm input, correct processing according to the user's preset

linkage settings and give corresponding prompts.

The setting options of the central alarm receiving server are provided, so that the alarm

information can be actively and remotely notified, and the alarm input can come from various

external devices connected.

The alarm information can be notified to the user by mail or APP push information.

1.2.7

Network Monitoring

Through the network, the audio and video data of the IP camera or NVS (Network Video Server)

of the NVR device is transmitted to the network terminal for decompression and reproduction.

The device supports 8 simultaneous online users to perform streaming operations.

The audio and video data is transmitted using protocols such as HTTP (Hyper Text Transfer

Protocol), TCP (Transmission Control Protocol), UDF (User Datagram Protocol), MULTICAST,

RTP (Real-time Transport Protocol), and RTCP (Real Time Streaming Protocol).

Use SNMP (Simple Network Management Protocol) for some alarm data or information

Support WEB mode access system, applied to WAN, LAN environment.

1.2.8

Split Screen

Image compression and digitization are used to compress several images in the same scale and

display them on the display of a monitor. 1/4/8/9/16/32 screen splitting is supported during

preview; 1/4/9/16 screen splitting is supported during playback.

1.2.9

Recording Function

The device supports regular recording, motion detection recording, alarm recording, and

intelligent recording. The recording file is placed on the hard disk device, USB (Universal Serial

Bus) device, and client PC (personal computer). It can be connected to the WEB terminal, USB

device, or local device. Query and playback the stored video files.

Summary of Contents for INTIPCK825TH








































































































































































































































































































































Search results

Summary of Contents for INTIPCK825TH

Reviews:

Related manuals for INTIPCK825TH

Brands by name

Popular brands

IntelLink INTIPCK825TH, User Manual

Search results

Summary of Contents for INTIPCK825TH

Reviews:

Related manuals for INTIPCK825TH

Brands by name

Popular brands