ENGLISH
3
Hard Drive
1
Remove the 4 screws from the chassis bottom.
2
Push the inner enclosure out to separate it from the outer chassis.
3
Set the first hard drive in the enclosure; connect the SATA and power cables.
4
Secure the drive using 2 screws on each side.
5
Using the tape provided, attach the thermal probe (black and white wire) to the first
hard drive. Choose a location between the two drives so the probe won’t be damaged
during the installation of the second drive. Set the second hard drive in the enclosure;
connect the SATA and power cables.
6
Secure the drive using 2 screws on each side.
7
Reverse Steps 2 and 1.
1
2
3
4
5
6
CAUTION!
H
ANdle
CArefUlly
,
As
sOme
edges
mAy
be
sHArp
Or
rOUgH
.
