21
ROUTER SETUP
advance to the next screen.
IP Address:
Enter the address provided by your ISP.
Subnet Mask:
Enter the address provided by your ISP.
Gateway IP:
This is provided by your ISP.
PPPoE
— This connection type (Point-to-Point Protocol over
Ethernet) is typically used with DSL and ADSL service. Click “Next”
to advance to the next screen.
User Name:
Enter the PPPoE user name provided by your ISP.
Password:
Enter the PPPoE password provided by your ISP.
Retype Password:
For confirmation.
Service Name:
For reference.
MTU:
Enter a value for the largest packet size to be permitted
for network transmission. The default value of 1496 is
recommended.
Maximum Idle Time:
Enter a figure within the range in order to
cut your connection with your ISP after that period of time.
BigPond
— Select if this service (Australia’s largest ISP) is used.
Click “Next” to advance to the next screen.
BigPond Account:
Enter the user name provided by the ISP.
BigPond Password:
Enter the password provided by the ISP.
Retype Password:
For confirmation.
Authentication Server:
This is provided by the ISP.
