31
When you finish the settings, click “Next” (7); to go back to a
previous menu, click “Back.”
2-3-5 Setup Procedure for PPTP xDSL
PPTP xDSL requires two kinds of settings: WAN Interface Settings
(setup IP address) and PPTP Settings (PPTP user name and
password). First, WAN Interface Settings:
Select how you obtain an IP address from your service provider.
You can choose “Obtain an IP address automatically” (equal to
DHCP — refer to “Cable Modem” above), or “Use the following IP
address” (i.e., a static IP address).
WAN interface settings must be correctly set; otherwise, the
MTU - If you don’t know what it is, ask your service provider for a
proper value.
Connection Type - There are 3 options: “Continuous” keeps the
Internet connection alive (doesn’t disconnect); “Connect on
Demand” only connects to the Internet when there’s a connection
attempt; “Manual” only connects to the Internet when “Connect” is
clicked, and disconnects when “Disconnect” is clicked.
Idle Time Out: Specify the time to shut down the Internet connection
after no Internet activity is detected. This option is only available
when the connection type is Connect on Demand.
Summary of Contents for 524681
