Items and meanings:
Enable Port
Check this box to enable port mapping,
Forwarding (1):
and uncheck this box to disable port mapping.
Private IP (2):
Input the IP address of the computer on the local
network which provides Internet service.
Type (3):
Select the type of connection, TCP or UDP. The
value depends on the requirements of your
application or service. If you're not sure what to use,
select 'Both'.
Port Range (4):
Enter the starting port number in the left field, and
input the ending port number in the right field. If
you only want to redirect a single port number, just
enter the port number in the left field.
Comment (5):
Enter any text to describe this mapping, up to 16
alphanumerical characters, e.g., "camera web
port".
Add (6):
Add the mapping to the port forwarding table.
Reset (7):
Resets all values of the input form.
Port Forwarding Shows all existing port forwarding rules (port
Table (8):
mappings).
Delete
Select
a
port
forwarding mapping by clicking
Selected (9):
the 'Select' box of the mapping, then click the
'Delete Selected' button to remove the mapping. If
there's no existing mapping, this button will be
grayed out.
Delete All (10):
Delete all existing port mappings.
Reset (11):
Unselect all mappings.
