31
Mode:
Automatic mode and manual mode on/off. In Manual mode, you can define
the connection speed. Auto is the default and recommended mode.
Speed:
When in Manual mode, you can define the port speed here: either
10 Mbps
or 100 Mbps.
Apply:
Apply current settings.
Link Information:
This section displays link status.
Port:
The router’s WAN and LAN ports.
Link:
Port is in use (on) or not connected (off).
Speed:
Current port speed: 10 or 100 Mbps.
Duplex:
Full or half duplex.
Link Statistics:
Detailed traffic statistic for each port.
NOTE
: Save the router configuration after completion; otherwise, the
configuration will be lost after the router is restarted.
4.6.4 Routing Table (for advanced users only)
Click “Basic setup”
➝
”Routing Table” to set up static routes:
Type:
Routing Type NET or Host.
Target:
Enter the IP address of the specified network or host you want to access
using the static route.
Mask:
Enter the subnet mask to be used for the specified network; e.g.,
255.255.255.0 => 24.
Gateway:
Enter in the gateway IP address for the specified network.
To save the new routing rule, click on the “Add” button. To delete a routing rule,
check the selection box behind the entry and click on the “Del” button.
Summary of Contents for 523608
