Once entered, the
Current Status
screen will appear.
There are three other options available in this screen:
Setup Wizard
,
Advanced Setup
, and
Statistics
.
Current Status
The left-hand side of the Current Status screen provides basic information about your wireless access
point, including the MAC Address, IP Address, Subnet Mask and Default Gateway.
On the right-hand side, you’ll find the SSID (Service Set Identifier), the Channel number, Rate, and
Security Level. Please note this information, since you’ll need it when you use the Setup Wizard.
All these settings, with the exception of the MAC Address, may be changed or modified using the
Advanced Setup screen.
(If the Security Level on your WAP is enabled, all devices on the network must also be at the same level
of security, using the identical security system and encryption codes. For initial setup, it is
recommended that security be disabled.)
