ports & indicators
Ports
The RJ45 connections on the front panel (partially shown in the image
below) match workstations, servers or other network devices to 10/100
Mbps switching ports that sense 10/100Mbps speed and automatically
negotiate full/half duplex mode, allowing you to connect the switch to
10Base-T and 100Base-TX devices.
LEDs
The front-panel leds (at left in image above) will be on (lighted), off or
blinking/flashing, indicating function status as follows.
POWER On:
The switch has power and is ready for use.
Off:
The switch has no power.
LINK/ACT On:
The port is ready for 10/100 Mbps connection.
Flashing: Data is being transmitted/received at 10 Mbps.
Off:
No link is established to the port.
connEctions
Power
The AC power outlet is on the rear
panel (as shown at right). Connect
the included power cord into the
switch’s power outlet, then plug
the other end into an AC outlet.
Confirm that the Power LED on the switch’s front panel is lit.
4
Power
11
Summary of Contents for 522618
Page 1: ...Fast Ethernet Rackmount Switch user manual Model 522618 INT 522618 UM 0909 01 ...
Page 2: ......
Page 7: ......
