Installation
1. Remove the slot cover by
turning the screw counter
clockwise.
2. Attach the carrier bracket to
the media converter.
First, unscrew the two screws
on the side of the media
converter housing, as
indicated by the circles.
3. Next, use these screws to
affix the bracket to the
media converter housing.
You will need a screw
driver with a Phillips –
head (“crosshead”).
Note: You need to attach
the bracket to the side of the
media converter, on which the
power plug is located. Check
the rear of the media converter
housing to find out on which
side the carrier
brackets needs to
be connected to.
14-Slot Media Converter Chassis Instructions
3
