6
2. Cable connection
a) Connect the included Ethernet cable to the
back of the Gigabit SATA NAS.
Connect the other end of the Ethernet cable
to a LAN switch or Router on your network.
Ideally, a DHCP server is installed
installed on your network which provides an
IP Address to the Gigabit SATA NAS.
b) Connect the power adapter to the power
outlet or a power strip. Connect the other
end to the DC input connector
on the backside of the SATA
NAS.
e) Power on the Gigabit SATA NAS by pressing the blue power
button.
3. Configuration
The Gigabit SATA NAS device is a network device designed to
obtain IP information from a DHCP server in your network. In most
cases this would be your Router.
The NAS supports UPnP and
will announce its presence to
UPnP enabled devices; e.g.,
your Windows computer.
Double-click the ‘UPnP NAS
Device’ icon to open up the
configuration page.
