hardware
din-rail installation
1. Angle the switch’s mounting clamp relative to the DIN rail (above left)
so that the rail is positioned under the upper lip of the clamp and behind
the metal springs.
2. Push the switch toward the DIN rail until the spring on the mounting
clamp clicks in place on the rail (above right).
wall-mount installation
1. Remove the DIN rail
mounting clamp from the
back of the switch.
2. Attach the wall-mount panel
to the back panel of the
switch using the six included
screws.
3. With the wall-mount panel
securely connected, attach
the switch to a wall or other
suitably sturdy vertical
surface.
DIN rail
Mounting
clamp
Switch
Spring
Wall-mount panel
Switch
