Intellinet 503457, Quick Install Manual

Page: 4 / 8

4. To run the adapter at a higher speed, select “Optimize for performance”
to enable the Tx Burst mode. Otherwise, “Optimize for WiFi” sets the
adapter to run with a standard wireless network. Click “Next.”
5. Once the software
installation begins,
a Setup Status
screen is followed
by a prompt to
connect the Wireless
G USB Adapter to
your computer. The
system automatically
detects the adapter.
NOTE: In Windows
Vista, a Found New
Hardware screen
appears (as shown) when the adapter is connected. You can ignore
the message, as it will disappear once installation is complete.
6. When the Finish screen appears, click “Finish.”
confiGUrAtion
The configuration utility — which displays automatically once the adapter
is connected — is a powerful application that helps you configure the