Intellinet 502931, Instructions Manual

Page: 2 / 12

2
ENGLISH
8-Port PoE Midspan • User Manual English
Thank you for purchasing the Intellinet Network Solutions 8-Port PoE
Midspan, Model 502931. For a full list of specifications, refer to the
datasheet available at intellinetnetwork.com .
CONNECTIONS & INDICATORS
Ports
The lower row of RJ45 ports — Data (In) — on the front panel delivers data
to the Midspan from existing network devices. The upper row of RJ45 ports
— Power + Data (Out) — delivers data while also powering added devices
(up to 15.4 watts per port). Use standard Cat5 or better Ethernet cables for
connections to PoE-supported IP cameras, wireless access points, other
switches, etc. NOTE: Powered devices should also comply with IEEE 802.3af.
LEDs
If an LED doesn’t light to
indicate a link or activity,
check the corresponding
device for proper setup and
operation.
Power
On the rear panel, plug in the included power
cord and connect the switch to an AC outlet.
Toggle the Power switch to On and confirm that
the Power LED is lit.
RACK MOUNTING
Simply align the two brackets with the holes on each side panel and secure
them with the included screws. Use the remaining screws to mount the
device in a rack.
LED Status Operation
POWER On
Power on
Off Check the AC connection; power on
PD Link On Port is linked and providing 48 V to a
(1-8) powered device
Off No link is established
PD LINK
1 2 3 4 5 6 7 8
POWER + DATA (OUT)
DATA (IN)
1 2 3 4 5 6 7 8
POWER
ON
OFF