28
Wireless
This screen enables the user to view information about wireless devices that are
connected to the Wireless Super G Router.
Connected Time: Displays
how long the wireless
device has been
connected to the LAN via
the router.
MAC Address: Displays
the device’s wireless LAN
interface MAC address.
Routing
This selection enables the user to set how the router forwards data: Static or
Dynamic. Routing Table enables the user to view the information created by
the router that displays the network interconnection topology.
Static
This enables the user to set parameters by which the router forwards data to its
destination if the user’s network has a static IP address.
Network Address: Type
the static IP address being
used to access the
Internet. The ISP or
network administrator
provides this information.
Network Mask: Type the
network (subnet) mask for
the network. If a value
isn’t entered here, the
network mask defaults to 255.255.255.255. As with Network Address, the
ISP or network administrator provides this information.
Gateway Address: Type the gateway address for the network. As with
Network Address, the ISP or network administrator provides this information.
Interface: Select an interface — WAN or LAN — to connect to the Internet.
Metric: Select which metric to apply to this configuration.
Add: Click to add the configuration to the static IP address table at the bottom
of the page.
Update: Select one of the entries in the static IP address table at the bottom
of the page and, after changing parameters, click “Update” to confirm the
changes.
CONFIGURATION
