Stereo Line In 1U System Manual
Connecting a Stereo Line In 1U to a Palette Case’s ¼” Jacks
The
Stereo Line In 1U
module ships with a ribbon cable for connecting to a pair of ¼” TRS
audio jacks — either those built-in to the 2nd generation
Audio Jacks Board
installed in
Intellijel
7U cases
; an
Intellijel Palette case,
or those contained within the separately available
Stereo
Out Jacks 1U
module.
To connect the
Stereo Line In 1U
module to the jacks installed in your
Intellijel Palette
case:
1.
Connect one end of the supplied ribbon cable to the keyed 6-pin connector on the
Stereo Line In 1U
module and the other end to the single keyed 6-pin connector on the
Palette case’s built-in circuit board.
Audio arriving at the corresponding pair of ¼” jacks is sent through to the
Stereo
Line In 1U
module for patching into your eurorack system at the correct voltage levels.
Page 10