BACK PANEL
Each Stereo Mixer 1U module features a pair of rear panel 3-pin Link connectors, which enable you
to serially connect multiple Stereo Mixer 1U (and/or the Intellijel Mixup or XY IO 1U) modules to
create a larger mixer with more inputs, or to connect the Stereo Mixer 1U directly to the ¼” jacks on
a compatible Intellijel case, and other compatible Intellijel modules.
[1]
CHAIN-OUT
- This connector taps into the Left and Right
OUT
bus. Use the supplied link cable
to connect the
CHAIN-OUT
of one Stereo Mixer 1U to the
CHAIN-IN
connector on another
compatible module (such as another Stereo Mixer 1U; a Mixup; an Outs module; or a
v2 Headphones 1U). Alternatively, use it to connect the module directly to the ¼” audio jacks on
a compatible Intellijel case (such as one of the Palette series cases, or the 7U case). When
used in this way, the case’s ¼” jacks become unbalanced Stereo Mixer module outputs.
[2]
CHAIN-IN
- This connector adds another pair of inputs directly to the Left and Right bus. Use
the supplied link cable to connect the
CHAIN-IN
of one Stereo Mixer 1U to the
CHAIN-OUT
connector on another compatible module (such as another Stereo Mixer 1U or a Mixup).
Alternatively, you may use this to connect the module directly to the ¼” audio jacks on a
compatible Intellijel case (such as the Palette series, or the 7u case). When used in this way,
the case’s ¼” jacks become unbalanced inputs to the Stereo Mixer module.
IMPORTANT : Never use the 3-wire Link cable to directly connect a Stereo Mixer 1U module to an
Intellijel Pedal I/O module. Although both modules use this same cable/connector — they serve
different purposes and carry different signals.
The following sections illustrate a few of the many possible device connections offered by the back
panel’s pair of 3-pin Link connectors.
Stereo Mixer 1U Manual
8
