PULSE COUNT
(SECTION 2)
These switches set the number of clock pulses at which the sequencer stays on a particular stage.
In general, the sequence will not advance to the next stage until the chosen number of clock pulses
has passed. Each stage’s pulse count can be set from 1 pulse to 8 pulses.
EXAMPLE : If the sequencer is currently on a stage with PULSE COUNT = 1 it will advance to
the next stage (as determined by the ORDER screen) upon receipt of the next clock pulse. If the
stage’s PULSE COUNT = 3, it will stay on the stage for 3 clock pulses before advancing.
In general, the type (and number) of gates generated while on a stage is determined by the
switches (described below).
NOTE: Metropolix offers the option of loading switch positions with a Preset in its
menu. If
you choose to load this data, then the pulse count you hear may not match the switches. You can
always see the currently used switch setting by pressing the EXIT button (to view the HOME
screens), then rotating the encoder to display
HOME Screen 3 : Panel Values & Preset Overrides
Metropolix Manual
17
