Quadra & Expander Manual
Once connected, the cabling between the module and power supply should resemble the
picture below:
Before reconnecting power
and turning on your
modular system, double
check that the ribbon cable
is fully seated on both ends
and that all the pins are
correctly aligned. If the pins
are misaligned in any
direction or the ribbon is
backwards you can cause
damage to your module,
power supply, or other
modules.
After you have confirmed
all the connections, you can
reconnect the power cable and turn on your modular system. You should immediately check
that all your modules have powered on and are functioning correctly. If you notice any
anomalies, turn your system off right away and check your cabling again for mistakes.
Page 5
