Intelligent Motion Systems MFM Motion Detector, Operating Instructions Manual

Page: 3 / 74

Important information
The drive systems described here are products for general use that conform to the
state of the art in technology and are designed to prevent any dangers. However,
drives and drive controllers that are not specifically designed for safety functions
are not approved for applications where the functioning of the drive could endan-
ger persons. The possibility of unexpected or un-braked movements can never be
totally excluded without additional safety equipment. For this reason personnel must
never be in the danger zone of the drives unless additional suitable safety equip-
ment prevents any personal danger. This applies to operation of the machine during
production and also to all service and maintenance work on drives and the machine.
The machine design must ensure personal safety. Suitable measures for prevention
of property damage are also required.
Qualification of personnel
Only technicians who are familiar with and understand the contents of this manual
and the other relevant documentation are authorized to work on and with this drive
system. The technicians must be able to detect potential dangers that may be
caused by setting parameters, changing parameter values and generally by the
operation of mechanical, electrical and electronic equipment.
The technicians must have sufficient technical training, knowledge and experience
to recognise and avoid dangers.
The technicians must be familiar with the relevant standards, regulations and safety
regulations that must be observed when working on the drive system.
Intended Use
The drive systems described here are products for general use that conform to the
state of the art in technology and are designed to prevent any dangers. However,
drives and drive controllers that are not specifically designed for safety functions
are not approved for applications where the functioning of the drive could endanger
persons. The possibility of unexpected or unbraked movements can never be totally
excluded without additional safety equipment.
For this reason personnel must never be in the danger zone of the drives unless
additional suitable safety equipment prevents any personal danger. This applies to
operation of the machine during production and also to all service and maintenance
work on drives and the machine. The machine design must ensure personal safety.
Suitable measures for prevention of property damage are also required.
In all cases the applicable safety regulations and the specified operating conditions,
such as environmental conditions and specified technical data, must be observed.
The drive system must not be commissioned and operated until completion of instal-
lation in accordance with the EMC regulations and the specifications in this manual.
To prevent personal injury and damage to property damaged drive systems must
not be installed or operated.
Changes and modifications of the drive systems are not permitted and if made all no
warranty and liability will be accepted.
The drive system must be operated only with the specified wiring and approved
accessories. In general, use only original accessories and spare parts.
The drive systems must not be operated in an environment subject to explosion
hazard (ex area).