17
Step 3. Testing basic functions
To test and check each device whether they work properly or not.
1. Door station calling indoor phone
Input room No. on door station to call indoor phone, indoor phone answers and unlocks the door.
Malfunction 1. Door station shows: Fail-2.
● Check the wiring between door station and gate
-way, distributor and gate-way
● Check if the DIP digit set in distributor is the same with the indoor phone setting on door station.
Malfunction 2. Door station enters ringing status, indoor phone doesn’t response.
●Check wiring between indoor phone and distributor.
2. Accessory door station calling indoor phone(only for system with accessory door station)
Dial room no. on accessory door station to call indoor phone, indoor phone answers and unlocks the door.
The problem phenomenon and solving method of the accessory door station is the same as the door station
3. Indoor phone monitor (only for video system)
Press monitor button on indoor phone to monitor the door station.
38
■
Door station setting
In P3, select “Door Station”, press[#]to confirm
，
LCD shows P8,
here enter door station No. and gate-way port No.
[Note] Door station No. is from 0001, gate-way port No. is the gate
way port to which door station connects.
Door station No.
0 0 0 1
Gate-Way Port :
1
(8)
Door station No.
0 0 0 6
Gate-Way Port :
6
(9)
e.g.
The 6th door station in the building, its No. is 0006,
Gate-way port is 6, after successful setting, a long sound of
“di” can be heard and LCD shows P9.
Press * button to return to P3.
■
Indoor phone setting
In P3 select “Indoor Phone”, press[#]to confirm
，
enter P10, setting
each indoor phone functions.
[Note] Use direction key [F1] or [F2] to choose function, press [*] to
back to P3.
(10)
1. Indoor phone digit
In P10 select “Bit”, press[#] to confirm, LCD shows P11, choose
indoor phone bit according to room No., press [#]to confirm, after
setting, the system will back to P10 automatically.
[Note] When setting indoor phone, this should be proceeded first.
2 bits
3 bits
4 bits
4 bits Current
(11)
2.Single Input
In P10, select “Single Input”, press[#]to confirm, LCD shows P12.
◆
Indoor phone: 2~4 digit indoor phone No. (It can be set at “Bit”
setting).
◆
Distributor: Input the distributor No. to which indoor phone
connects. Valid scope: 001~254 (use three digits).
◆
Port No.: Input the distributor port No. to which indoor phone
connects, Valid scope: 1~4.
◆
Ring Type: This system provides 3 types of ring for option, input
ring No. (1~3).
According to hint, input data, then it shows P13.
Indoorphone:_ _ _ _
Distributor:_ _ _
Port No.:_
Ring Type:_
Then input indoor phone information, two input methods: Single input
mode and matrix input mode. Users can choose what they need.
(12)
Indoorphone:0101
Distributor:001
Port No.:1
Ring Type:3
(13)
Single Input
Matrix Input
Clear Data
Bit
Indoorphone:0101
Distributor:001
Port No.:1
Successful
(14)
After finish, it shows P14, then back to P12
，
input next indoor
phone No. or press [*] to back to P10.
[Note] 1.Ringing is only heard when indoor phone is called .
2. When system’
s ring is chord, there are 3 types of rings for
chosen, otherwise it is always “Dingdong” ring when choose
1-3.