Intelligent Design IDBA, User Manual

Page: 19 / 32

English
1 7
Installation Windows XP
Step 1 - Bluetooth
Provided that your computer already has
Bluetooth support please continue with step 2.
If not, insert the supplied Bluetooth dongle in a
USB port on your computer. Windows will then
automatically install and set up the dongle,
after which you can continue with step 2. If you
encounter problems with this step, for example
if the drivers aren't found, refer to page 22.
Step 2 - Batteries
Insert the batteries as described on page 1 7
and turn the mouse on.
Step 3 - Installation
At this point you need to set up a connection
between the mouse and your computer.
Depending on your software version, the
following steps are generally required;
• Click on the '
Windows Start
' button. Click on
'
Control Panel
'.
• Now click on '
Printers and Other Hardware
'.
Click on '
Bluetooth devices
'. Within this menu
click on '
Add
'.
• Turn the mouse on and press the 'connect'
button on the bottom side of the mouse.
• Now you need to check the radio button '
My
device is setup and ready to be found
' and
click on the '
Next
' button.
• The mouse will appear in the list of found
devices. Please select the mouse and click on
the '
Next
' button to install the mouse.
• Select the option '
Don't use a passkey
'.
Once the mouse has been successfully
installed, you can close the wizard.
Step 4 - Installation complete
This concludes the installation; you can now
start using your Titanium Mouse. When your
computer restarts, or after you turn off the
mouse, you do not need to repeat the above
steps.